Can auto glass work be done at your office or apartment parking lot?

Yes, auto glass work can usually be done at your office or apartment parking lot, as long as the property allows it and the spot works for the job. Office and workplace parking lots work well for mobile service, so you can keep working while the glass is replaced. The location needs room to open the doors and walk around the vehicle, a dry or covered spot if rain is expected so the adhesive cures properly, and access for the technician, including any gate code or parking permit. Some ADAS calibrations need more: adequate space and a level surface for a static calibration, or suitable weather, traffic and road conditions for a dynamic one.

The most common problem is not the glass but the location: a tight garage, a gate nobody can open or building rules nobody checked. This guide is written by Mavi Auto Glass, a locally owned, 100% mobile auto glass company based in Roseville that works at offices, apartments and job sites across Sacramento, Roseville, Rocklin, Citrus Heights, Elk Grove and the rest of Greater Sacramento. It shows what each kind of location needs and what to check before booking.

How do different parking spots compare for glass work?

Each kind of spot has its own strengths and limits. The table compares the places drivers usually ask about.

What should you check at an apartment or office building?

Check the rules and the access before the appointment. These are the usual points.

• Whether the property manager, landlord or employer allows outside service providers in the lot
• Gate codes, visitor passes or parking permits the technician will need
• Whether your assigned spot has room on both sides of the car
• Whether there is a covered level in the garage if rain is expected
• Building quiet hours or work hours that limit when the job can be done

How do you set up a parking lot appointment?

Send the location details with the vehicle details. You can do it in 4 steps.

1. Share the vehicle details: year, make, model and a photo of the damage.
2. Describe the spot: open lot, garage level or street, and how much room there is around the car.
3. Send access details: gate codes, permits and where the technician should check in.
4. Arrange the keys: decide who will hand them over and stay reachable by phone.

Whether someone has to stay with the car is covered in our guide to being present for a mobile replacement.

Can a calibration be done in a parking lot?

Often, yes, depending on the method. A static calibration uses targets placed in front of the vehicle, so it needs adequate space and a level surface, which an open lot may provide and a tight garage may not. A dynamic calibration is done while driving, so it depends on the roads nearby, the traffic and the weather. Mavi Auto Glass performs ADAS static and dynamic calibration with its own Autel equipment, in most cases in the same appointment as the windshield replacement, when the vehicle, location and conditions allow.

What about several cars at the same workplace?

They can often be planned together. When several vehicles are parked at one address, the visits can be coordinated around the work schedule. Businesses with company vehicles can use the fleet and commercial auto glass service, and individual drivers can learn more about mobile auto glass service.

Before booking work at your office or apartment

Ask your property manager or employer whether service providers are allowed, and get the gate code or permit the technician will need. Choose a spot with room on both sides of the car, covered if rain is in the forecast, and send the vehicle details, a photo of the damage and a description of the spot when you book.